- Material:aluminum
- overflow pipe: yes
- Color:traffic white, black gray, anthracite gray, jet black
- Important:
·Products should be unpacked immediately upon receipt to prevent moisture from accumulating between the packaging and the product, which can cause stains that are difficult to remove.
·The inside is coated black with polyurea.
·The pH value of the water should be neutral (7) so that the material is not attacked.
·Clean the outside of the pond annually by spraying off the dirt with clean tap water and then treating it with a cleaning agent. Do not use a high-pressure cleaner and/or scouring pad. This will damage the coating.
·Limescale deposits can be removed with the ADEZZ Descaler BIO.
·Always unplug the appliance when it is freezing.
·Lower the water level to below the overflow pipe. This is about 10 cm below the edge. Attention! The pump must be submerged.
·We recommend an ice-preventing device (available in any garden center or hardware store).
·The pump can remain in the water if the above conditions are met. Of course, you can also take the pump out of the water and leave it in a frost-free place over the winter.
- production time: Ponds are not part of the standard program and are manufactured especially for each customer.
The delivery time for standard dimensions is 8 weeks, the delivery time for custom-made products is on request. - DANGER:For products that cannot be unloaded over the rear tail lift of the truck due to their length, the customer must unload the pallet themselves over the side wall of the truck using their own forklift truck upon delivery!
