Two things determine almost everything about a Tribù dining area: the tabletop and the chair. The top determines how much care the table needs and how it ages. Ceramic and glazed lava stone are virtually impervious, travertine is beautiful and sophisticated, teak turns grey if left untreated. The chair determines how long you stay seated. Its seat height must match the table height, and its material should complement the top rather than compete with it. Tribù tables and chairs do not need to come from the same series. Good dining areas are often created precisely from two series.
This comparison categorizes Tribù dining tables and garden chairs, led by the garden chair, by top, frame, and seat construction. All tables are listed under Tribù Dining Tables, all chairs under Tribù Garden Chairs. The information on designers, materials, and seat heights comes from the manufacturer.
The tabletop: five materials, five characters
Ceramic is the most common top material at Tribù. It is solid-colored and laminated onto glass. The manufacturer describes it as highly UV-resistant, frost-resistant, extremely scratch-resistant, and completely stain-resistant. Red wine or oil can therefore be easily wiped off. It is cleaned with clear water and pH-neutral soap, while an optional Ceramic Protector makes the surface even smoother. For a dining area that is used daily and stands outside all year round, ceramic is the easiest choice.
Glazed lava stone is used on the Nox dining table. The lava stone tops from Mount Vesuvius are glazed by hand, creating a fine crackle effect. Tribù describes them as UV-stable, waterproof, and resistant to heat, frost, chemicals, and stains.
Travertine is available in Otto and now also in Vis à Vis. The natural stone is warm, lively, and develops a patina. However, it is also the most sensitive material in the range: oil, red wine, and acids soak in, and acid can permanently discolor it. Tribù recommends wiping up spills immediately and covering the table when not in use. Travertine is the top for those who appreciate an aged surface and can live with traces of use.
Lightweight concrete defines the Tao series. The material is dense and low in porosity, and according to the manufacturer, resistant to frost and salt water. Oily stains should still be removed immediately. Because each piece is handmade, slight variations in color and texture are part of the material.
Teak is the classic tabletop, found on models such as Kos, Suro, and Vis à Vis. It is weather-resistant, can remain outside all year round, and turns silver-grey if left untreated. This patina is purely aesthetic. Those who want to preserve the golden tone treat the wood with Teak Sealer every season. Tribù advises against oil or varnish, as they can lead to peeling, mold, and stains. The appropriate cleaners for each top are listed under Tribù Care Products.
Dining tables at a glance
| Series | Design | Frame | Top | Shapes available in the shop |
|---|---|---|---|---|
| Tosca | Monica Armani | tapering legs | Ceramic | oval 240 and 298 cm, also low |
| T-Table | Tribù Studio | stainless steel tube | Ceramic or teak | round, square, oval, also low |
| Otto | Marc Merckx | teak base | Ceramic or travertine | round and rectangular, also low |
| Nox | Tribù Studio | stainless steel | glazed lava stone | 264 and 352 cm |
| Tao | Monica Armani | lightweight concrete base | slim top | round 160 and 180 cm, oval 240 cm |
| Nagomi | Inoda+Sveje | cast aluminum | Teak or ceramic | 240 and 320 cm |
| Amanu | Yabu Pushelberg | Teak | ceramic tiles | 290 and 350 cm |
| Ray | Moritz Gründel | aluminum | Ceramic or teak | 240 and 320 cm |
| Lucca | Studio Segers | shield-shaped legs | Ceramic | 240 and 320 cm |
| Illum | Merckx & Maes | aluminum or teak | Ceramic or teak | 212 and 267 cm |
| Branch | Lievore Altherr Molina | cast aluminum | aluminum or teak | 210 and 300 cm, bistro tables |
| Kos | Studio Segers | Teak | Teak | 98 cm square, 224 and 308 cm |
| Suro | Christophe Delcourt | Teak | Teak | 210 to 630 cm |
| Vis à Vis | Piergiorgio Cazzaniga | Teak | Teak or travertine | 99 cm square, 300 to 700 cm |
Three tables stand out from the rest. Tosca features a water-jet-cut, oval ceramic top whose soft curves complement the shells of the Tosca chairs. Otto stands on a fluted teak base that Marc Merckx derived from Italian bar counters and columns from the 1940s. Suro can be extended using brass profiles and reaches up to 630 cm in the shop, enough for a large family or a hotel terrace.
The chairs: frame, seat, and seat height
When looking at the chairs, three values are worth considering: the frame material, the construction of the seat and backrest, and the seat height. Tribù dining tables are approximately 75 cm high, while most of the brand's dining chairs have a seat height of 46 to 50 cm and offer a classically upright seating position. Models with a height of 43 to 44 cm sit lower and more casually, more like an armchair at the table. When mixing chairs from different series, you should ensure that the seat heights do not differ by more than two or three centimeters.
| Series | Design | Frame | Seat and backrest | Seat height |
|---|---|---|---|---|
| Nodi | Yabu Pushelberg | stainless steel | woven Canax® rope | 50 cm |
| Tosca | Monica Armani | stainless steel | wide, padded woven band | 49 cm |
| Kos | Studio Segers | Teak | wide teak slats | 49 cm |
| Ray | Moritz Gründel | aluminum | padding | 49 cm |
| Mood | Studio Segers | Teak | Tricord® backrest | 48 cm |
| CTR | Piergiorgio Cazzaniga | stainless steel | Tricord® backrest, seat cushion | 48 cm |
| Amanu | Yabu Pushelberg | Teak | Canax® covering | 48 cm |
| Branch | Lievore Altherr Molina | cast aluminum | glass fiber-reinforced polypropylene | 47 cm |
| Illum | Merckx & Maes | aluminum | Batyline® | 47 cm |
| Nagomi | Inoda+Sveje | cast aluminum | Canax® weave | 46 cm |
| Elio | Yabu Pushelberg | Teak | Tricord® rope | 44 cm |
| Suro | Christophe Delcourt | Teak or aluminum | woven rope | 44 cm |
| Lucca | Studio Segers | aluminum | knitted Canax® on foam | 43 cm |
Among the Tribù furniture available to order from us, the armchairs from Tosca and Mood are the most popular pieces. Both showcase what makes Tribù dining chairs distinctive: Tosca with a soft stainless steel shell and wide woven band, Mood with a rounded teak frame and a handwoven Tricord® backrest. Those who prefer a cleaner look will find the CTR armchair to be a minimalist alternative. Its Tricord® backrest is attached at only two points and appears to float above the frame. The Kos armchair with wide teak slats is a robust choice for a terrace where people gather to eat and celebrate.
From our studio: Tosca dining table with Branch chairs
A Tosca dining table with chairs from the Branch series stands in our studio in Rostock. This combination shows that the table and chairs do not need to come from the same series. Monica Armani's oval ceramic top and Lievore Altherr Molina's organically shaped Branch chairs share the same soft lines without repeating them.
Branch is inspired by a branch. The frame is made of cast aluminum with a double powder coating, while the seat and backrest are made of glass fiber-reinforced polypropylene with an ergonomically shaped backrest. The chairs are stackable and can be stored compactly in winter. A seat cushion is optional. Our experience in the studio: the table and chairs pair very well together and are extremely easy to maintain in everyday use. Those who would like to try the combination are warmly invited. All models in the series are shown in the Tribù Branch Collection, and the tables in the Tribù Tosca Collection.
Combinations that work
- All teak: Kos table with Kos or Mood armchairs. Wood on wood ages evenly and remains a cohesive look for years. Find out more in our post about Tribù Pure and Kos.
- Ceramic and woven materials: Tosca, Nagomi, or Lucca table with chairs from Tosca, Nagomi, or CTR. The easy-care top pairs with a soft, textile-like weave.
- Stone and teak: Otto with a travertine top and Mood or Amanu chairs. The warmest combination in the range, for those who appreciate patina.
- Graphic and dark: Nox with a lava stone top and Nodi chairs in dark frame colors, set against modern concrete and glass architecture.
- For many guests: Suro or Vis à Vis in lengths of up to 630 or 700 cm, combined with stackable Branch chairs for additional seating.
Dining low: Low Dining
One trend that Tribù is consistently developing is the low dining table. It is lower than a classic dining table and is paired with deeper, armchair-like chairs. This creates a space between a dining table and a lounge area, where you can stay seated after eating. The shop offers low dining tables from Tosca, Otto, and T-Table, as well as the low Tosca dining chair and the Ray Low Dining armchair with a 41 cm seat height. Our post about the Tribù 2027 New Arrivals shows how Tribù is expanding this concept with the 2027 collection. Those planning a lounge area nearby will find an overview of all series in the Tribù Sofa Comparison.
Planning the size
At the table, you should allow approximately 60 cm in width per person, and 65 to 70 cm for armchairs. A 240 cm long table therefore offers six to eight seats, while a 320 cm long table offers eight to ten. At least 80 cm should remain clear behind each chair so that you can stand up and pass by. Round and oval tables such as Tosca, Tao, or T-Table encourage more conversation at the table because everyone can see each other, while rectangular tables make better use of a narrow terrace. Further information on care and materials can be found on the Tribù Materials & Care page, with an overview of all series in the Tribù Brand World.
We provide prices for Tribù dining tables and chairs upon request. They depend on size, top, frame color, and cushions. By making an inquiry about the product, you will receive a personal quote including VAT and delivery. The Tribù Sample Box shows original tops, fabrics, and woven materials.
Frequently asked questions about Tribù dining tables and chairs
Which Tribù tabletop is the easiest to care for?
Ceramic and glazed lava stone. Tribù describes ceramic as frost-resistant, extremely scratch-resistant, and completely stain-resistant, and lava stone as resistant to heat, frost, chemicals, and stains. Both are cleaned with water and pH-neutral soap.
Is travertine suitable for a garden table?
Yes, but it requires care. Travertine absorbs oil, red wine, and acids. Spills should be removed immediately, and the table should be covered when not in use. In return, it develops a lively patina.
Can I combine Tribù tables and chairs from different series?
Yes. For example, our studio in Rostock features a Tosca dining table with Branch chairs. The key is a matching seat height and a common design line in terms of shape or color.
What is the seat height of Tribù dining chairs?
Most Tribù dining chairs have a seat height of 46 to 50 cm, such as Tosca and Kos at 49 cm, Mood and CTR at 48 cm, and Branch at 47 cm. Elio and Suro sit slightly lower at 44 cm, while Lucca has a seat height of 43 cm.
Which Tribù chairs are stackable?
The Branch chair and Branch armchair are stackable. They are made of cast aluminum and glass fiber-reinforced polypropylene, making them suitable as additional seating.
Can Tribù dining tables remain outside in winter?
Tables with tops made of ceramic, lava stone, lightweight concrete, or teak are designed for year-round outdoor use. For travertine, Tribù recommends using a cover. Seat cushions should be stored dry and well-ventilated in winter.


